Updating chipped wii Xxxx girl hot usa


so the image above shows CECH-4003A but it will be in the below table as CECH-40XX the last 2 numbers do not affect whether it can be downgraded or not so we don’t need to list that part.

See which programmer works with your console CECHAxx (OK To Downgrade) NAND = Progskeet / TEENSY 2.0 CECHBxx(OK To Downgrade) NAND = Progskeet / TEENSY 2.0 CECHCxx(OK To Downgrade) NAND = Progskeet / TEENSY 2.0 CECHExx (OK To Downgrade) NAND = Progskeet / TEENSY 2.0 CECHGxx (OK To Downgrade) NAND = Progskeet / TEENSY 2.0 CECHHxx(OK To Downgrade) NOR = Teensy 2.0 / Progskeet / E3 Flasher CECHJxx (OK To Downgrade) NOR = Teensy 2.0 / Progskeet / E3 Flasher CECHKxx (OK To Downgrade) NOR = Teensy 2.0 / Progskeet / E3 Flasher CECHLxx (OK To Downgrade) NOR = Teensy 2.0 / Progskeet / E3 Flasher CECHMxx(OK To Downgrade) NOR = Teensy 2.0 / Progskeet / E3 Flasher CECHPxx (OK To Downgrade) NOR = Teensy 2.0 / Progskeet / E3 Flasher CECHQxx (OK To Downgrade) NOR = Teensy 2.0 / Progskeet / E3 Flasher DECHAxx (OK To Downgrade) This information was taken from HERE and HERE CECH-20xx(OK To Downgrade) NOR = Teensy 2.0 / Progskeet / E3 Flasher CECH-21xx (OK To Downgrade) NOR = Teensy 2.0 / Progskeet / E3 Flasher CECH-25xx A or B (with date code [0C] [0D] [1A] are known to be ok) NOR = Teensy 2.0 / Progskeet / E3 Flasher ALL THE REST with Min Ver Chk from HERE IF IT SAYS 3.55 OR BELOW YOU CAN DOWNGRADE TO 3.55 IF IT SAYS 3.56 THEN YOU MUST GO TO THE LATEST CFW DO NOT GO TO 3.55 IF IT SAYS 3.60 THEN YOU MUST NOT DOWNGRADE AT ALL OR YOU WILL BRICK THE CONSOLE) CECH-30xx 1c. id=335 1d NAND 48 pin uni-clip (360-clip new type) 1e.

plug in the fan (DO NOT MISS THIS STEP) re attach the power brick connect the wires in red and screw it down in blue flip it back over and your all set Phat Strip Down the "phat" ps3 On the left side of the console you will see a few rubber feet.

The first screw to be removed is underneath the rubber foot circled in red in the picture below.

Your controller USB cable (to connect the flasher to your pc) 11. The drive enclosure has a metal pull tab attached to it. Remove the three T8 security Torx screws on the underside of the PS3 slim.